Graham Cabin · Exterior Stone

Stone Selection for 112 Anglers Ridge

Talking Rock, GA 30175 · Yard visits November 12, 2026
My pick: North GA Stone

North GA Stone in Blairsville is my pick for the cabin.

We looked into four of the most viable local stone yards. Most of the stone they carry is quarried in northern Tennessee. It is the most common stone in this region, and it comes in browns, tans and grays with some deep reds.

The only other option I found that is mostly gray is the Tennessee Limestone. I think any of these would look great with the ash we selected, which is a very neutral brown.

North GA Stone had the most stone to choose from, they run the biggest and most professional yard, and their veneer pricing came in lowest. Anne found them first. They have three stones that fit the house, and I need you to pick one.

4
yards visited
3
stones to choose from
$7.50 to $8.75
per sq ft at my pick

Why these three

  • Milled flat on the back. All three come sawn flat, cleaned and ready to set. That saves a lot of labor.
  • It stays on the wall. A flat, clean back bonds to the mortar. Stone with a loose layer on the back can shake off and pop off the wall later.
  • Homesteader and Ashlar are the same stone. The yard cuts the Ashlar into bigger, squarer pieces, and that is the extra dollar a square foot.

The three options at North GA Stone

All three are natural stone, cut thin so it bonds to the wall. Tap a photo to enlarge it.

Random pattern, Homesteader Traditional

Option A
North GA Stone, Blairsville

Smaller, less regular pieces in gray, tan and brown. It suits wide, over-grouted joints and a rustic feel.

One thing to know. The sample board shows random, angular shapes, and most of the pallet I looked at was square. The shape depends on the pallet, and we may find more random pieces deeper in the stack.

$7.50 per sq ft

Square pattern, High Country Ashlar

Option B
North GA Stone, Blairsville

Bigger squares and rectangles with tighter joints, in the same gray, tan and brown as the Homesteader. This is the cleaner, more built look.

$8.50 per sq ft

Tennessee Limestone

Option C
North GA Stone, Blairsville

A natural limestone that comes fully prepped for install. The color is mostly gray with a little rust, and it reminds me of the gray granite further down this page. The color stays more even from piece to piece than the other two. They have little of it in the yard today, and they can get plenty.

$8.75 per sq ft

What we do next

  1. Pick a stone. Homesteader, Ashlar or Tennessee Limestone. Look at the photos with Anne and tell me which one you want on the house.
  2. Tell me how you feel about color. The Homesteader and Ashlar mix gray, tan and brown. The limestone stays mostly gray.
  3. I lock the numbers. I finish the square footage takeoff, including the exposed concrete we need to wrap, and confirm the price with the yard.

Honorable mentions

The other yards I stopped at. One stone is still on the table, and I am passing on the rest.

Gray granite

Still an option
Country Boy Stone, Blue Ridge

A solid natural granite, mined right here in Jasper. The color is mostly gray with some rust. It comes milled and ready to install. They do not make corners for it, and it costs the most of anything I saw. I am keeping it on the table because I like the look.

$12 per sq ft, no corners

Tennessee stone veneer and corners

Passing
Country Boy Stone, Blue Ridge

This yard is close to the cabin, and they had a lot of good-looking corners. It is the same material I saw at the other yards, all of it from northern Tennessee. They had almost enough of it for the house, but not enough.

Sawn-back thin veneer

Passing
North Georgia Co-Op

Good stone, cut flat on the back so it goes up clean. They do not have corners and they do not have enough of it in stock for the house, so I am leaving them out. I wanted you to know I stopped.

About $9 per sq ft

Thin veneer wall and pallet stone

Passing
Stone Yard Landscape Supply, East Ellijay

My first stop of the day. They have a wall of thin veneer samples at $11 a square foot, which is out of our price range. They also have pallet stone near $5 a square foot. That stone is not sawn on the back, so it takes longer to set and we would pay the savings back in labor. I say we pass.

$11 per sq ft for the veneer, about $5 for the pallet stone